Skip to main content
Family-Run North East Roofers • Free Quotes • Written Guarantees

Flat Roof Repairs

Bubbles in an EPDM rubber roof: what causes them and when do they need attention?

Noticed bubbles or blisters in your rubber roof? We explain possible causes, warning signs and when inspection or an EPDM repair may be needed.

Roofing advice from our team, with useful sources for further reading.

Explore All Roofing Guides →

Bubbles in an EPDM rubber roof do not automatically mean the roof needs replacing. Some are associated with installation adhesives; others need a closer look at the bond or the roof beneath. The appearance alone cannot tell you which explanation applies.

At Emperor Roofing, we would want to know when the raised areas appeared, whether they change with the weather and whether there are any leaks or loose edges. We can then discuss the checks needed and whether monitoring, a local repair or more extensive work is appropriate.

What does a bubble in a rubber roof actually mean?

“Bubble” and “blister” usually describe a raised pocket in the rubber. A wrinkle may look more like a fold or ridge. Those descriptions help us understand what you can see, but they do not establish the cause or prove that water is getting through.

It also matters how the membrane was meant to be held in place. Fully adhered roofs are bonded across the surface. Some other EPDM systems use mechanical attachment or designed ballast instead. Elevate describes these different arrangements for RubberGard; they should not be confused with a bonded domestic roof that has developed a loose patch.[1]

You do not need to identify the fixing method yourself. Send the original quote or product details if you have them. If all you know is that it is a “rubber roof”, that is enough to start the enquiry.

Our EPDM roofing guide explains the system more generally. Here, we are concentrating on the raised areas you have noticed and what to do about them.

Why can bubbles appear soon after the roof is fitted?

One possible cause is vapour trapped beneath the membrane during bonding. Rubber4Roofs explains that solvent-based contact adhesive needs the specified drying time before the surfaces are brought together. If that stage is rushed, vapour can form pockets beneath the rubber. Some of these pockets may reduce as the vapour escapes.[2]

The amount and spread of adhesive can matter too. PermaRoof's technical explanation identifies both insufficient adhesive and uneven, heavy application as possible reasons for poor bonding or blistering.[3]

These are possibilities to investigate, not a way to diagnose the work from a photograph. We would ask which adhesive was used, where the bubbles sit and what the conditions were during installation. A patch beside a wall and several raised areas across the middle may need different checks.

The useful question for the installer is: “What do you think has caused this, and how will you confirm the bond is satisfactory?” Simply saying that rubber roofs sometimes bubble leaves the important part unanswered.

Why does the roof look flatter when it cools down?

Rubber4Roofs describes another possible mechanism in certain warm-roof arrangements: trapped air and moisture beneath the membrane can expand as the roof heats up, then reduce as it cools. Gaps between boards and dampness within the construction can be relevant.[2]

That is why a roof that looks flat on a cool morning may look different later. The pattern is useful information; it does not, by itself, prove that the roof is sound or that the membrane needs replacing.

If you can see the roof safely from an upstairs window, photographs from the same position at different times can help. Note whether it was sunny, overcast, wet or windy. Do not go onto the roof to press the bubble down or see what is inside.

Where the construction beneath is in question, we would explain what further assessment is needed. Our flat-roof construction guide covers those layers without assuming every roof has the same arrangement.

If the bubbles disappear, has the problem gone away?

A flatter surface does not always confirm that the original bond has recovered. PermaRoof's FAQ explains that adhesive-related bubbles may recede while the membrane remains unbonded in those areas, with pockets returning under different weather conditions.[4]

If the roof is newly fitted, contact the installer promptly with dated photographs and the original job details. Ask whether they need to inspect it, what they believe is happening and what follow-up they propose. Keep their answer with the roofing paperwork.

If monitoring is recommended, ask what has already been checked and when the position will be reviewed. Agree which changes should prompt another call. There is a difference between a considered inspection followed by monitoring and being told to wait indefinitely without an explanation.

We would not give every bubble the same waiting period. The roof system, installation history and findings need to guide that decision. If water starts entering or an edge comes loose, report that change rather than waiting for the agreed review.

Which signs mean the roof needs attention?

We would prioritise the enquiry using what has changed and whether the roof is keeping water out. This table is a guide to the information to give us, not a diagnosis or a reason to climb up for a closer look.

What you have noticed What to do next
Raised areas on a new roof, with no visible leak Tell the installer and ask for an assessment and a clear follow-up plan.
Water entering the room or new damp appearing Report the active leak promptly, including where and when it occurs.
A loose edge, an opening at a joint or a damaged corner Arrange a prompt inspection and mention the damaged detail.
The membrane lifting or moving noticeably in the wind Report the movement. Keep clear and leave roof access to the contractor.
A raised area becoming larger or appearing in new places Send dated photographs if safely available and ask for the change to be reviewed.

On small screens, scroll the table sideways to view every column.

Edges and wall junctions deserve attention as well as the middle of the sheet. For example, Flex-R explains that its ClassicBond base-securement detail helps control membrane movement and pulling at perimeters and upstands. The correct detail depends on the system fitted.[5]

If water is already coming inside, our roof leak action plan explains the immediate household precautions.

What would we check before recommending a repair?

We would start with the roof's history: its age, when the bubbles first appeared, any previous leaks and any recent work nearby. A roof that has looked the same since installation is a different enquiry from an older roof that has suddenly changed.

The inspection would need to consider the affected membrane, the surrounding bond and the relevant seams, edges and openings. We would also discuss whether the condition beneath can be assessed adequately without opening anything, and explain any uncertainty that remains.

A dry, suitable surface matters when bonding a membrane. Elevate's RubberCover guidance requires a clean, dry base and rules out adhering onto a wet surface. This is why simply adding adhesive is not an adequate answer if the condition beneath has not been established.[6]

If further investigation is needed, ask us what it should establish and how any opening will be made weatherproof. You should understand what is being checked before agreeing to work that disturbs the roof.

Can bubbles be repaired without replacing the whole roof?

Sometimes. The repair needs to suit the cause and the condition around it. A local bonding problem is a different proposal from renewing damaged roof layers beneath a wide area.

Rubber4Roofs describes re-bonding as a possible response to more severe adhesive-related bubbling. Where the membrane itself needs a repair, Elevate lists compatible flashing and preparation products for its RubberCover system. Those are examples of system-specific solutions, rather than permission to use the same patch on every rubber roof.[2][7]

Possible approach What needs explaining first
Monitor after inspection Why this is appropriate, what has been checked and when it will be reviewed.
Local re-bonding Whether the existing membrane and surface can be prepared and bonded satisfactorily.
A compatible membrane or detail repair What defect is being repaired and how the repair connects to sound material.
Opening and renewing affected roof layers What is wrong beneath the covering and how far the work needs to extend.

On small screens, scroll the table sideways to view every column.

If a larger renewal is recommended, ask for the findings that justify it. We would also explain what can be retained. A whole-roof price should follow a reasoned assessment of the roof, rather than the sight of one raised patch.

Should you pop, flatten or paint over the bubbles?

Please leave them intact until they have been assessed. Piercing a waterproof sheet creates an opening that then needs a proper repair. Pressing it flat will not tell you whether the surface beneath is suitable for bonding.

Do not use bricks or paving slabs as an improvised way to hold it down, or add a coating because it is labelled “roof repair”. Those actions can make the original condition harder to assess and do not establish why the membrane lifted.

Compatibility matters. Elevate specifically warns against contact between RubberCover and certain oils, petroleum-based products, fresh bitumen and grease. A product sold for another type of roof is not automatically suitable for EPDM.[6]

Tell us about anything already applied, including its product name if available. There is no need to hide a previous attempted repair; knowing about it helps us decide what to check and which materials may be suitable.

What should the quote and next steps make clear?

A useful quote should explain the work behind the price. For bubbles in a rubber roof, ask it to distinguish the membrane repair from any work to the deck, insulation, edge details or access arrangements.

We suggest checking these points before agreeing:

  • The finding: what has been established, and what remains uncertain?
  • The area: which raised areas or roof details are included?
  • The method: what materials and preparation are proposed?
  • Hidden problems: how will extra work be explained and agreed if opening reveals more?
  • Completion: what records, follow-up and written cover apply to the repair?

If the roof was fitted recently, keep the original installer involved while the issue is assessed. Give us any product or guarantee documents when requesting a second opinion; they help identify the existing system and the work already agreed.

Send photographs only from a safe existing viewpoint. HSE highlights the need to plan roof access and protect against falls, including on small jobs. Please do not climb onto the roof to measure the bubbles or test its firmness.[8]

We offer flat roof repairs in Newcastle, Gateshead and the wider North East. Use our enquiry form to send your postcode, the age of the roof if known and what has changed. Tell us straight away if water is entering.

Frequently Asked Questions

Are all bubbles in an EPDM roof harmless?

No. Some may be related to installation adhesives and can reduce, but others need investigation. The condition of the bond, roof details and layers below matters. We would not describe every raised area as harmless without assessing the roof.

Does a bubble mean there is water underneath?

Not necessarily. A raised pocket can have more than one explanation. Tell us about any damp indoors and whether the appearance changes with the weather, but do not puncture it to find out what is inside.

How long should new EPDM roof bubbles take to disappear?

There is no single waiting period we would apply to every roof. Ask the installer for advice based on the actual products and findings, with a review date. A bubble becoming smaller is not the only check needed.

Why is the rubber lifting only near a wall or roof edge?

The location makes the bonding and finishing details there worth checking. It does not identify the cause by itself. Send a wider photograph, if safely possible, so the relationship to the wall, corner or roof edge is clear.

Is a small bubble worse than a long wrinkle?

Appearance and size alone do not decide the urgency. We would consider whether the area is changing, whether nearby joints and edges are sound, and whether there is water entry. Mention all of those observations when you enquire.

Can you give a firm repair price from a photograph?

A photograph helps us understand the enquiry, but it may not show the cause or condition underneath. We would explain what assessment is needed before confirming the repair scope, access and final price.

Does a bubble automatically mean the installation was faulty?

It is a reason to ask for an explanation and any necessary inspection. A photograph alone is not enough to decide responsibility. Keep the original quote, installation date, photographs and the installer's response together.

Do bubbles mean I should switch to fibreglass or felt?

Not automatically. First establish what is causing the problem and whether a suitable EPDM repair is possible. Changing the top covering without understanding the roof beneath may leave the reason for the work unresolved.

References & Sources

These sources explain the possible causes and product-specific repair principles discussed above. The instructions for the membrane and materials on your own roof must guide any work. Links open in a new tab.

  1. Elevate RubberGard EPDM roofing systems ↗ The distinction between fully adhered, mechanically attached and ballasted EPDM systems. The actual roof specification must be identified.
  2. Rubber4Roofs Why are there bubbles or blisters on my EPDM rubber roof? ↗ Supplier guidance on adhesive vapour, trapped air and moisture, and circumstances in which re-bonding may be considered.
  3. PermaRoof UK Why do membrane bubbles and wrinkles form? ↗ A technical explanation of how adhesive coverage and application can affect the membrane bond.
  4. PermaRoof UK EPDM flat roofing FAQs ↗ Explains that adhesive-related bubbles can recede while areas remain unbonded and may rise again.
  5. Flex-R ClassicBond system and accessories ↗ Product-specific information on securing the membrane at perimeters and upstands to control movement.
  6. Elevate Frequently asked questions about RubberCover EPDM ↗ Manufacturer guidance on suitable dry substrates and materials that should not contact this membrane.
  7. Elevate RubberCover EPDM accessories ↗ Examples of compatible primers, flashing and repair materials for the RubberCover system.
  8. Health and Safety Executive Roof work ↗ Planning safe roof access and precautions against falls, including during repair and maintenance.
Call Peter 07498 297937 Free Quote Call Robert 07777 166851